Rolling Mortar Wall
| Workpiece name : | Rolling mortar wall |
| Workpiece material : | High manganese steel |
| Machining position : | Inner conical surface |
| Machining type : | Continuous, rough machining |
| Inserts grade : | CNS3030 |
| Insert specification : | SNMN150716 |
| Cutting type : | Dry cutting |
| Workpiece hardness : | HB240 |
| Cutting parameters : | Vc=60m/min ap=6mm f = 0.4mm/r |
| PCD cutting tools : | The life is improved by 200% |
| The efficiency is promoted by 14% |
| CUTTING TOOL CONTRAST | CUTTING SPEED VC(M/MIN) | EFFICIENCY (S/PCS) | LIFE (PCS/EDGE) |
| European CBN | 60 | 70 | 1 |
| iSC CNS3030 | 75 | 60 | 3 |
| Workpiece name : | Rolling mortar wall |
| Workpiece material : | Mn18 | Workpiece hardness : | HB300 |
| Machining position : | Inner conical surface |
| Machining type : | Continuous, rough machining |
| Inserts grade : | FBN7630 |
| Insert specification : | SNMN150716 |
| Cutting type : | Dry cutting | Cutting parameters : | Vc=100m/min ap=5mm f = 0.5mm/r |
| PCD cutting tools : | The life is improved by 200% |
| The efficiency is promoted by 36% |
| CUTTING TOOL CONTRAST | CUTTING SPEED VC(M/MIN) | EFFICIENCY (S/PCS) | LIFE (PCS/EDGE) |
| Japanese and Korean alloy | 40 | 140 | 0.3 |
| iSC FBN7630 | 100 | 90 | 1 |
